Kawasaki Teryx Front Glass (2020+) Windshield by Dirt Warrior

Kawasaki Teryx KRX 1000 / KRX4 1000 Front Glass Windshield by Dirt Warrior Accessories

This Kawasaki Teryx KRX 1000 front windshield from Dirt Warrior Accessories is real automotive-style glass, not plastic — a full quarter-inch of DOT laminated safety glass in a 1/8" aluminum frame. Two independently adjustable vents sit low in the frame, so you can crack them open for airflow on a hot day or shut them tight when the weather turns. DWA runs a slim frame on purpose, which means more glass and a wider view of the trail ahead.

Key Features

• Full 1/4" laminated DOT safety glass — the same construction as your truck's windshield, so it won't haze or scratch like polycarbonate
• Two independently working lower vents open about 3½" to 4" each, and you can run one open and one closed
• Slim 1/8" aluminum frame keeps frame width down and glass area up for a wider field of view
• Textured black powder coat resists scratching better than a smooth gloss finish
• Bolts on with cage clamps and included hardware — most owners are done in minutes with four fasteners
• Comes off just as easily when you want an open cab
• Optional upper 20% tint strip, four inches tall, cuts glare from a low sun
• Optional manual wiper mounts to the dip in the top frame rail
• Optional custom frame and emblem colors to match your machine

Fitment Notes

• Fits Kawasaki Teryx KRX 1000, 2-seat and 4-seat (KRX4), 2020 and newer
• Choose your seat configuration when you order — the 2-seat and 4-seat glass are different panels
• Templated to work with the factory cage and roof
• Fitment on aftermarket cages and roofs can't be guaranteed; a cage that drops lower on the sides changes how the panel seals
• Running pillar-mounted lights? The brackets may sit where the frame lands, so plan on a small bracket adjustment
• DWA builds in a minimum tolerance because no two factory-assembled cages measure exactly alike. Expect minimal water entry where the glass meets the roof and hood — this seals up a cab, but it is not a submarine
• No weather stripping needed before install

Specifications

• Brand: Dirt Warrior Accessories
• Part number: FWSK-KRX1000-24
• Glass: full 1/4" laminated DOT safety glass
• Frame: 1/8" aluminum
• Finish: standard textured black powder coat, custom colors available
• Vents: two independent lower vents, roughly 3½" to 4" of travel
• Wiper provision: yes, top frame accepts a manual wiper
• Tint: 4" upper 20% strip available; full front tint is not legal on a front windshield
• Weight added to the machine: about 35 lb
• Templated in-house by DWA's own fabrication team
• Trailerable — best facing rearward on the trailer

Real Life Value and Uses

• Crack both vents on a hot desert run to pull air through the cab without taking rocks to the face
• Shut them down when the temperature drops and hold real heat in the cab on a cold morning
• Cut the dust cloud that hangs in the cab when you're second or third in line on a tight trail
• Ride out a rain squall without soaking the dash, gauges, and your passenger
• Pull the panel off in an afternoon when you want the cab wide open for summer
• Add the wiper and the rear windshield later to build toward a full enclosure
• Keep grit off the switch panel and stereo face, which is where sand does the most expensive damage

Why Choose Dirt Warrior Accessories

• Runs laminated DOT glass instead of polycarbonate, so scratches and haze don't ruin your view a season in
• Templates every panel on real machines with their own fabricators rather than reworking a generic pattern
• Builds a slim frame for maximum glass, not a thick frame that blocks the trail
• Offers glass-only replacement panels, so a rock strike doesn't cost you the whole windshield
• Matches almost any frame or emblem color, including manufacturer color codes and hex codes
• Backs the product with a manufacturer's warranty and a claim process

Give your KRX a real windshield — pick your seat count and color, and reach out to our team if you're running an aftermarket cage or pillar lights and want fitment confirmed first.